FYH UCTU212-900 bearing units

Load Direction:Radial; Retainer Type:Punching; Clearance sign:No; Rolling Element Material:Steel; Inner/Outer Ring Material:Steel; Retainer Type:Punching; Outer Ring:With Outer Ring; Raceway Ring Shape:Tapered Roller; Special Configurations Code:No; Special Configurations Code:No;

s1:30.5 mm; G:M6x1; C0:6.65 kN; Designation of housing:PG204N-; Recommended tightening torque for set screw:5.5 Nm; d:20 mm; T min.:-20 °C; S:17 mm; B:34 mm; J:49 mm;

Shape:Flanged Pilot Type; Number of Bearings:Double; Flange Shape:Compact Type; Holder Surface Treatment:Not Provided; Number of Bearings:Double; Days to Ship:14 Days; Volume Discount:Available; Bearing Material:Steel; Bearing Used:Deep Groove Ball Bea; Housing Material:304 Stainless Steel;

C:33.5 kN; T min.:-40 °C; s1:24 mm; J:141 mm; T max.:100 °C; A2:49 mm; B:48 mm; S:19 mm; N:23mm; A1:16 mm;

da min:61.5 mm; Characteristic rolling element frequency, BSF:6.44 Hz; d:55 mm; Characteristic inner ring frequency, BPFI:6.91 Hz; Characteristic outer ring frequency, BPF0:5.09 Hz; ra max:1 mm; B:18 mm; Mass:0.36 kg; rs min:1.1 mm; d1:63.6 mm;

Holder Symbol:No; Inner/Outer Ring Material:Steel; Inner/Outer Ring Material:Steel; Cylinder shape (suffix symbol: X):No; Days to Ship:9 Days; Internal Clearance Symbol:CN (Normal Clearance; D:110; Precision (JIS):Grade 0; Large-capacity type:E (Large-capacity ty; Combination of two pieces:Standard;

Weight:0.67 kg; T max.:100 °C; L:86 mm; A1:11 mm; T min.:-20 °C; J:64 mm; e:15 mm; B:34 mm; d:15 mm; N:12mm;

T min.:-20 °C; B:77.8 mm; Weight:2.3 kg; m:12 mm; S:33.3 mm; d:74.61 mm; Recommended tightening torque for set screw:27.1 Nm; r:2; C0:49.5 kN; C:30 mm;

Characteristic outer ring frequency, BPF0:8.81 Hz; Min operating temperature, Tmin:-30 °C; Radial rigidity:787 N/µm; Characteristic inner ring frequency, BPFI:11.19 Hz; Brand:SNR; D6:110.7 mm; B:24 mm; f0:15.94; Axial rigidity:394 N/µm; Fatigue limit load, Cu:3.45 kN;

Shape:Bottom Mount; Bearing Retained:No; RoHS:6; Holder Surface Treatment:Black Oxide Coating; Bearing Part Number:6201; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):12; T(mm):30 ～ 40; Height H(mm):25 ～ 40; Lateral Width L(mm):42;

Type:Bearings with Housin; Housing Material:1045 Carbon Steel; Bearing Part Number:6001; Number of Bearings:Double; Bearing Retained:No; Width T(mm):50; Shape:Flanged Pilot Type; Flange O.D. H(φ):54; Bearing Material:[Steel] Steel; Volume Discount:Available;

Days to Ship:6 Days; Pillow Type, Category:Standard; Lubrication method:Oil Supply Type; Unit, Type:Bearing unit; Bearing Unit, Type:Pillow Type; Bearing Inner Dia. Shape:Cylindrical Bore Set; Pillow Type, Category:Standard; d:45; Temperature Properties:Standard; Unit Body Material:Cast Iron;

Bearing type symbol:No; Special Configurations Code:No; Precision Grade Symbol:No; Precision:Grade 0; Outer Ring Shape:Flat; Retainer Type:Punching; Contact angle(Degree):30; Inner/Outer Ring Material:[Steel] Steel; Clearance sign:CN (standard); Seal, Shield Symbols:No;

T min.:-20 °C; d1:37.4 mm; L:130 mm; J:103 mm; H1:14.5 mm; A1:21 mm; C:14 kN; T max.:100 °C; S:17.4 mm; B:34.8 mm;

S:37.3 mm; Designation of bearing:EX215-47G2T04; C0:49.5 kN; SW:4.76 mm; L:232 mm; A2:48 mm; N1:32 mm; Weight:7.8 kg; A5:37.3 mm; s1:61.2 mm;